Name: TS5A3166YZPR
Brand: Texas Instruments
SKU: TS5A3166YZPR
Price: 0.71000 USD
Availability: InStock

new-10%

TS5A3166YZPR

Manufacturer part number:TS5A3166YZPR

Manufacturer:Texas Instruments

Description:7ns, 11.5ns SPST - NO 900mOhm BOTTOM Analog Switches MAKE-BEFORE-BREAK TS5A3166 5 Pins 20nA 1.8V 5-XFBGA, DSBGA

Case Package:SOT-23

Datasheet:TS5A3166YZPR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	5-XFBGA, DSBGA
Number of Pins	5
Weight	1.587573mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS5A3166
Pin Count	5
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	7 ns
Input Voltage (Max)	7V
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	11.5 ns
On-State Resistance (Max)	900mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	7ns, 11.5ns
Charge Injection	1pC
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	500μm
Length	1.75mm
Width	1.25mm
Thickness	310μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3166YZPR Product Details

TS5A3166YZPR Overview

Packed in 5-XFBGA, DSBGA, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 5 terminations totally. By its 1 channels, the electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. 5 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with TS5A3166. This digital multiplexer has 900mOhm internal resistance. Please refer to the datasheets for 5 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.65V. 10nA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. This switch operates within the bandwidth of 200MHz.