Name: DG271BDY-E3
Brand: Vishay Siliconix
SKU: DG271BDY-E3
Price: 6.69000 USD
Availability: InStock

new-10%

DG271BDY-E3

Manufacturer part number:DG271BDY-E3

Manufacturer:Vishay Siliconix

Description:65ns, 65ns SPST - NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG271 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG271BDY-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	13 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	50Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	DG271
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	5.5mA
Nominal Supply Current	5.5mA
Power Dissipation	600mW
Max Supply Current	7.5mA
Throw Configuration	SPST
Turn On Delay Time	65 ns
Number of Inputs	4
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	65 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	65ns, 65ns
Charge Injection	-5pC
Crosstalk	-100dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Voltage - Supply, Dual (V±)	±15V
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG271BDY-E3 Product Details

DG271BDY-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching with DG271 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 50Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. The analog switch ic is of the Dual supply type and is cost-effective. A low voltage of 13V should be applied to the electronic component. The switch device would be able to operate with 5.5mA current. The analogue multiplexer may be damaged if voltage is greater than 7.5mA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. Operating voltages of 15V are compatible with the electrical part. In order to operate the 4 inputs, there are several steps to follow.