Name: DG407BDN
Brand: Vishay Siliconix
SKU: DG407BDN
Availability: InStock

new-10%

DG407BDN

Manufacturer part number:DG407BDN

Manufacturer:Vishay Siliconix

Description:107ns, 88ns 60Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 500pA 15V 28-LCC (J-Lead)

Case Package:SOT-23

Datasheet:DG407BDN Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Weight	1.182714g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	60Ohm
Terminal Finish	TIN LEAD
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	30
Pin Count	28
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	7.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Power Dissipation	450mW
Max Supply Current	500μA
Propagation Delay	148 ns
Turn On Delay Time	125 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	94 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	60Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	86 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	6pF 54pF
On-state Resistance Match-Nom	3Ohm
Switch Time (Ton, Toff) (Max)	107ns, 88ns
Charge Injection	11pC
Channel-to-Channel Matching (ΔRon)	3 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height	3.69mm
Length	12.57mm
Width	12.57mm
RoHS Status	Non-RoHS Compliant

DG407BDN Product Details

DG407BDN Overview

As the electronic part is packed in 28-LCC (J-Lead), international shipping is convenient. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 28 terminations. Due to its 8 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component of this type can be found in the 28 series. Circuits number 2 make up this analogue multiplexer. It has an internal resistance of 60Ohm. For details about the functions of 28 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Digital switch that provides Dual, Single power at a cost-effective price. There should be 7.5V voltage fed to the electrical part below 7.5V. Putting voltage greater than 500μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 5V should be attached. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. 15V operating voltages can be used with this electrical part. It is possible to operate 16 inputs.