Name: 74HCT4351DB,112
Brand: Nexperia USA Inc.
SKU: 74HCT4351DB,112
Availability: InStock

new-10%

74HCT4351DB,112

Manufacturer part number:74HCT4351DB,112

Manufacturer:Nexperia USA Inc.

Description:35ns, 23ns 120Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4351 20 Pins 100nA 4.5V 20-SSOP (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:74HCT4351DB,112 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	160Ohm
Terminal Finish	NICKEL PALLADIUM GOLD
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	74HCT4351
Pin Count	20
Operating Supply Voltage	5V
Power Supplies	5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	400nA
Power Dissipation	500mW
Propagation Delay	6 ns
Turn On Delay Time	75 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	170MHz
Turn-Off Delay Time	65 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	120Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	9Ohm
Switch Time (Ton, Toff) (Max)	35ns, 23ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.025A
Height Seated (Max)	2mm
Length	7.2mm
Radiation Hardening	No
RoHS Status	RoHS Compliant

74HCT4351DB,112 Product Details

74HCT4351DB,112 Overview

This electronic part is conveniently packaged in 20-SSOP (0.209, 5.30mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 8:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~125°C TA degrees Celsius. A total of 20 terminations have been recorded. A electrical component with 8 channels is capable of high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 20 pins. The circuits in this analogue multiplexer number 1. Using the 74HCT4351 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 160Ohm. To find out what the 20 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. 4.5V should be the lowest voltage fed to the electronic component. 400nA current would be enough for this multiplexer to operate. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. If you are using a dual power supply, you should attach at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. The electronic component can function from 5V. The transfer of data can be performed over 170MHz bandwidths.