Name: DG412LDJ
Brand: Vishay Siliconix
SKU: DG412LDJ
Availability: InStock

new-10%

DG412LDJ

Manufacturer part number:DG412LDJ

Manufacturer:Vishay Siliconix

Description:19ns, 12ns SPST - NO 17Ohm Analog Switches 250pA 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG412LDJ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Supplier Device Package	16-PDIP
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	17Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	900mW
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Max Supply Current	1μA
Turn On Delay Time	85 ns
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	17Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	19ns, 12ns
Charge Injection	5pC
Crosstalk	-95dB @ 1MHz
Height	3.81mm
Length	21.33mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

DG412LDJ Product Details

DG412LDJ Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. Mounted in Through Hole is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. These analog multiplexers are built based on SPST - NO switching circuits. There are 4 circuits in this switch device. Analog switches have 17Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 12V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2.7V should be the lowest voltage fed to the electronic component. Put voltage above 1μA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. With dual power supplies, you should attach at least 3V. A temperature above 85°C is not suitable for operation of the analogue multiplexer. Suppliers offer the 16-PDIP package.