Name: DG2720DN-T1-E4
Brand: Vishay Siliconix
SKU: DG2720DN-T1-E4
Availability: InStock

new-10%

DG2720DN-T1-E4

Manufacturer part number:DG2720DN-T1-E4

Manufacturer:Vishay Siliconix

Description:30ns, 25ns DPDT 7Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG2720 10 Pins 100nA 3V 10-UFQFN

Case Package:SOT-23

Datasheet:DG2720DN-T1-E4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Weight	7.002332mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	208mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2720
Pin Count	10
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	3V
Power Supplies	3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.3V
Min Supply Voltage	2.6V
Operating Supply Current	2μA
Nominal Supply Current	2μA
Power Dissipation	208mW
Turn On Delay Time	30 ns
Data Rate	480 Mbps
Supply Type	Single
Bandwidth	620MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	7Ohm
Multiplexer/Demultiplexer Circuit	2:2
Off-state Isolation-Nom	30 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4pF
On-state Resistance Match-Nom	0.35Ohm
Switch Circuit	DPDT
Switch Time (Ton, Toff) (Max)	30ns, 25ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	350m Ω
Crosstalk	-49dB @ 240MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.6V~4.3V
Height	550μm
Length	1.8mm
Width	1.4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG2720DN-T1-E4 Product Details

DG2720DN-T1-E4 Overview

Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 2:2. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 10. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. As part of the design of the 10 series, this electronic part has been incorporated into the system. DPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. Use DG2720 to search for variants of the digital switches. A 7Ohm internal resistance characterizes this multiplexer. To find out what the functions of 10 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 4.3V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2.6V. For this digital switch to work, 2μA current would suffice. Using a single voltage supply, this switch device consumes 2.6V~4.3V volts. A voltage of 3V can be used to operate the electronic component. The transfer of data can be performed over 620MHz bandwidths. The analog switch ics includes 4 outputs.