MAX313ESE+T Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -40°C~85°C TA. In total, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. The electronic part body is injected with 16 pins. Unlike digital switches, these are based on SPST - NO switching circuits. There are 4 circuits in this multiplexer. Try searching with MAX313 if you're looking for variants. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 30V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. Putting voltage greater than 100pA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. Operating voltages of 20V are compatible with the electrical part.
MAX313ESE+T Features
1 Channels
Switch Circuit: SPST - NO
MAX313ESE+T Applications
There are a lot of Maxim Integrated MAX313ESE+T Analog Switches & Multiplexers ICs applications.
- Transmit
- Fiber In The Loop (FITL)
- PDH Multiplexers
- Audio and video signal routing
- Routers
- Audio and video switching
- Industrial and process control systems
- Fiber to the Home
- High speed data transmission line cards
- SDH/SONET multiplexers
