BPV23F Overview
Bulk is used to protect the photodiodes from damage. Photodiodes are protected by Radial, Side View packages in order to ensure their safety. A continuous reverse-bias mode can only sustain 60V voltage per photodiode. A continuous reverse-bias voltage of 60V should be maintained for the photodiodes. Photodiodes have a pin count of 2. Within a circuit, photodiodes could generate 215mW heat. A photodiode should not operate at a temperature higher than 100°C. It should be noted that the photodiodes should be operated at -40°C as a minimum operating temperature. A reverse anode voltage of 60V should be applied to the photodiodes. It is generally recommended that the maximum heat released by photodiodes should be 215mW in a circuit. It is possible to operate the photodiodes satisfactorily with the reverse voltage of 60V in the DC circuit. Getting current to flow across a photodiode requires the voltage 1.3V. A photodiode conducts 2nA current without light input.
BPV23F Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 870nm ~ 1050nm
Viewing Angle: 120°
BPV23F Applications
There are a lot of Vishay Semiconductor Opto Division BPV23F Photodiodes applications.
- Currency Validation
- Diode Laser Monitoring
- High speed photo detector
- High speed photo detectors
- Measurement Levelling
- Light Bariers
- Medical and Industrial
- YAG laser detection
- LiDAR
- Infrared remote control
