Name: UC2856DWG4
Brand: Texas Instruments
SKU: UC2856DWG4
Availability: InStock

new-10%

UC2856DWG4

Manufacturer part number:UC2856DWG4

Manufacturer:Texas Instruments

Description:16 Terminals 7V~40V 16-Pin UC2856 DC to DC converter IC SWITCHING CONTROLLER 2 Outputs 200kHz Transistor Driver

Case Package:SOT-23

Datasheet:UC2856DWG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Weight	473.692182mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	15V
Frequency	1MHz
Base Part Number	UC2856
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	13.1V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7V~40V
Control Features	Enable, Frequency Control, Soft Start
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	CURRENT-MODE
Frequency - Switching	200kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	40ns
Synchronous Rectifier	Yes
Fall Time (Typ)	40 ns
Nominal Input Voltage	40V
Max Duty Cycle	50 %
Duty Cycle (Max)	47%
Output Phases	1
Height	2.65mm
Length	10.3mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2856DWG4 Product Details

UC2856DWG4 Overview

This switching controller fits most application requirements since it is packaged in a 16-SOIC (0.295, 7.50mm Width) package. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 7V~40V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 200kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "UC2856". There are only 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 13.1V voltage according to the test statistics. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 1MHz frequencies. It is possible to set the input voltage to 40V for nominal working status. The supply voltage must be 15V.

UC2856DWG4 Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz