Name: UC3824NG4
Brand: Texas Instruments
SKU: UC3824NG4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Package / Case	PDIP
Surface Mount	NO
Number of Pins	16
Weight	1.053808g
JESD-609 Code	e4
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Additional Feature	CURRENT MODE OPERATION ALSO POSSIBLE
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	THROUGH-HOLE
Number of Functions	1
Frequency	1MHz
Pin Count	16
Number of Outputs	2
Input Voltage-Nom	15V
Temperature Grade	COMMERCIAL
Max Supply Voltage	30V
Analog IC - Other Type	SWITCHING CONTROLLER
Current - Output	200mA
Frequency (Max)	1MHz
Voltage - Output	13V
Input Voltage (Min)	8.8V
Topology	Boost
Control Mode	VOLTAGE-MODE
Frequency - Switching	1MHz
Control Technique	PULSE WIDTH MODULATION
Switcher Configuration	PUSH-PULL
Max Duty Cycle	100 %
Duty Cycle (Max)	85 %
Height	4.57mm
Length	19.3mm
Width	6.35mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

UC3824NG4 Product Details

UC3824NG4 Overview

Capsuled in the PDIP package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Using this switching controller, it is possible to switch at 1MHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 8.8V is the minimum required for the dc dc voltage regulator. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set at CURRENT MODE OPERATION ALSO POSSIBLE in order to fulfill the requirements more effectively. At least 0°C°C is recommended. At70°C, dc regulator should run. 1 functions are available in total for the switch converters. We design voltage regulators switchings with 16 pins. The controller can set a maximum frequency of 1MHz. With 200mA inputs, switching controller is ideal. It outputs a value of 13V in normaloperating procedures. Voltage maximum is rated 30V.