LTC3862IUH-1 Overview
In the 24-WQFN Exposed Pad package, the switching controller meets most application requirements. For 2 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 8.5V~36V. A -40°C~125°C TJ dc switcher is not a problem. With this switching controller, you can switch at 75kHz~500kHz. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . Various 24 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 8.5V is the minimum required for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 3.8V. At most, the dc to dc regulator accepts 36V input voltage. For better satisfaction, the value of DC to DC voltage regulator is 10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE.
LTC3862IUH-1 Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE
LTC3862IUH-1 Applications
There are a lot of Linear Technology/Analog Devices LTC3862IUH-1 DC to DC converter applications.
- Access control systems
- Refrigerators of central air conditioners
- Alternators
- Electric water heaters
- Low output voltage switching power supply circuits
- seismic instrument power circuits
- Servo drive system
- Surge protection circuits
- Product testing
- PSRR circuits
