TLC7733QPWREP Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-TSSOP (0.173, 4.40mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.7V volt supply. Power management conducts at a voltage of 1. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 9μA. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using TLC7733, the base power ics number. A maximum supply temperature of 16μA can be used with this power management.
TLC7733QPWREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7733QPWREP Applications
There are a lot of Texas Instruments TLC7733QPWREP Voltage Supervisors applications.
- FPGA design
- Military communications
- Rechargeable batteries
- Stable power system
- Detection of phase loss
- Leakage protection
- Power distribution systems of infant care room
- Leakage current detection
- Medical-specific isolation transformer
- Dash board
