MAX16021PTEV+ Overview
A total of 16 terminals are used to mount this power management. In terms of packaging, power management follows the Tray model. To assist you, this PMIC includes 16-WQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 225 is specified for the package. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The pins of the power management system count 16. Supply voltage (Vsup) should be at least 1.53V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 1.2μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX16021, the base power ics number.
MAX16021PTEV+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.53V
1.2μA operating supply current
MAX16021PTEV+ Applications
There are a lot of Maxim Integrated MAX16021PTEV+ Voltage Supervisors applications.
- Leakage current detection
- Display equipment
- FPGA design
- Electrical fire monitoring system
- Leakage protection
- Microprocessor system
- Utility meter
- Smartphones
- emergency room
- Smart meter
