BU4334F-TR Overview
A total of 4 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-82 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Manage ics operate at 2.4V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 4 pins on power management. Power managment ic pin count is 4. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 1.75μA.
BU4334F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4334F-TR Applications
There are a lot of ROHM Semiconductor BU4334F-TR Voltage Supervisors applications.
- Consumer electronics
- Automotive power systems
- Battery cars
- Magnetic resonance imaging
- DSP
- Power distribution systems of operating room
- Utility meter
- Battery-powered equipment
- Sensitive sensors
- Insulation fault location system
