Name: TL594IPWG4
Brand: Texas Instruments
SKU: TL594IPWG4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Terminal Pitch	0.65mm
Frequency	300kHz
Base Part Number	TL594
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	40V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7V~40V
Control Features	Dead Time Control, Frequency Control
Input Voltage (Min)	7V
Topology	Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	1kHz~300kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	200ns
Synchronous Rectifier	No
Fall Time (Typ)	45 ns
Max Duty Cycle	45 %
Duty Cycle (Max)	97%
Output Phases	1
Length	5mm
Width	4.4mm
RoHS Status	ROHS3 Compliant

TL594IPWG4 Product Details

TL594IPWG4 Overview

This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 7V~40V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 1kHz~300kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "TL594". There are only 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 7V. DC regulator outputs 40V voltage according to the test statistics. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 45 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controllers operate at 300kHz frequencies.

TL594IPWG4 Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz