Name: UC2823AQG3
Brand: Texas Instruments
SKU: UC2823AQG3
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	CAN ALSO BE CONFIGURED IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Frequency	1MHz
Base Part Number	UC2823
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	2V
Output Type	Transistor Driver
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	1mA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~22V
Control Features	Current Limit, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	8.8V
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	400kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	20ns
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Max Duty Cycle	100 %
Height Seated (Max)	4.57mm
Length	8.965mm
Width	8.965mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

UC2823AQG3 Product Details

UC2823AQG3 Overview

This switching controller fits most application requirements since it is packaged in a 20-LCC (J-Lead) package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 8.4V~22V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 400kHz~1MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Current Limit, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 20 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "UC2823". There are only 20 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 8.8V. DC regulator outputs 2V voltage according to the test statistics. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 1MHz frequencies. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN CURRENT MODE in order to better satisfy the requirement. A supply current of 1mA is used to power it.

UC2823AQG3 Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE