LM5025SDX/NOPB Overview
With a 16-WFDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 2 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 8V~15V. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 200kHz~580kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. Other relevant dc to dc converter ics can be found by searching "LM5025". 16 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8V. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 80 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 1MHz on this dc regulators.
LM5025SDX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5025SDX/NOPB Applications
There are a lot of Texas Instruments LM5025SDX/NOPB DC to DC converter applications.
- Bending machines
- Planers
- Direct power supply system
- Injection molding machinery
- Remotely powered electric motors
- Low output voltage switching power supply circuits
- Communication system
- Mobile phones
- Series voltage regulation circuits
- Digital display device
