TL074CDRE4 Overview
There is a SOIC case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape and Reel case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. The input offset voltage is 10mV. The buffer amplifier is capable of operating from a supply current of 1.4mA . There should be no change in the voltage gain at 106.02dB. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 85°C. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 18V. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.
TL074CDRE4 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
TL074CDRE4 Applications
There are a lot of Texas Instruments
TL074CDRE4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
