THS4021IDRG4 Overview
There is a D case in which the instrumentation amplifier is packaged. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. It is possible to operate this buffer amplifier from a supply current of 7.8mA . 90.88dB should be the voltage gain. Op amp ic has 1 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The electrical part is capable of being powered by a voltage of under 32V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 9V. As a general rule, you should conduct this electronic component under dual supply voltages of 16V volts. As an additional benefit of this buffer amplifier, please refer to the following: IT CAN ALSO OPERATE WITH 9 TO 32V SINGLE SUPPLY.
THS4021IDRG4 Features
8 Pins
90.88dB voltage gain
THS4021IDRG4 Applications
There are a lot of Texas Instruments
THS4021IDRG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
