TLV2475CDRG4 Overview
There is a D case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape and Reel case. We are approaching the 16h termination of the year. In total, there are 16 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 16 pins are located on the operational amplifiers. The input offset voltage is 2.2mV. The buffer amplifier is capable of operating from a supply current of 600μA . There should be no change in the voltage gain at 120dB. For this linear amplifier to work, the temperature should not be below 0°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 70°C. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 3V. Under 6V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 3V.
TLV2475CDRG4 Features
16 Pins
supply voltage of 3V
120dB voltage gain
TLV2475CDRG4 Applications
There are a lot of Texas Instruments
TLV2475CDRG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
