TL064BCDE4 Overview
In the package, you will find a D-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 14 pins on it. Op amp rates 3mV as input offset voltage. Using an 200μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 75.56dB for the time being. To operate this buffer amplifier, the temperature must not be lower than 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. 4 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part.
TL064BCDE4 Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064BCDE4 Applications
There are a lot of Texas Instruments
TL064BCDE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
