AD8317ACPZ-R2 Overview
There is a LFCSP EP case in which the instrumentation amplifier is packaged. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. It is possible to operate this buffer amplifier from a supply current of 22mA . Op amp ic has 1 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. There are 3 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The electrical part is capable of being powered by a voltage of under 5.5V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 3V. There is an 22mA quiescent current running through op amp ic. 40kOhm is the range in which the op amp resistance should lie. An analog IC known as a LOG OR ANTILOG AMPLIFIER is the other type of IC that is used in this op amp ic.
AD8317ACPZ-R2 Features
8 Pins
supply voltage of 5V
Resistance of 40kOhm
AD8317ACPZ-R2 Applications
There are a lot of Analog Devices, Inc.
AD8317ACPZ-R2 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
