ALD2726PB Overview
In the package, you will find a PDIP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 2.5V battery. Op amp rates 150μV as input offset voltage. You should keep the voltage gain at 100dB for the time being. On the buffer amps, there are 2 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electrical part should be conducted under the dual supply voltage of 5V volts when you conduct this part.
ALD2726PB Features
14 Pins
supply voltage of 2.5V
100dB voltage gain
ALD2726PB Applications
There are a lot of Advanced Linear Devices, Inc.
ALD2726PB Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
