SN74LVTH273PWR Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). It is contained within the Cut Tape (CT)package. There is a Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 2.7V~3.6V. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74LVTHseries of FPGAs. A frequency of 150MHzshould be the maximum output frequency. In total, there are 1 elements. As a result, it consumes 190μA of quiescent current without being affected by external factors. 20terminations have occurred. D latch belongs to the 74LVTH273 family. A voltage of 3.3V is used to power it. Its input capacitance is 4pFfarads. In this case, the D flip flop belongs to the LVTfamily. Surface Mount mounts this electronic component. A total of 20pins are provided on this board. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 8 Bits. Vsup reaches 3.6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2.7V. The superior flexibility is achieved through the use of 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. Optimal efficiency requires a supply voltage of 3.3V. The 64mA output current allows it to be designed with the greatest amount of flexibility. In terms of quiescent current, it consumes 5mA .
SN74LVTH273PWR Features
Cut Tape (CT) package
74LVTH series
20 pins
8 Bits
SN74LVTH273PWR Applications
There are a lot of Texas Instruments SN74LVTH273PWR Flip Flops applications.
- Latch
- Shift Registers
- Differential Individual
- Instrumentation
- Shift registers
- Convert a momentary switch to a toggle switch
- Functionally equivalent to the MC10/100EL29
- Single Down Count-Control Line
- Load Control
- ESD performance
