74F174PC Overview
The package is in the form of 16-DIP (0.300, 7.62mm). The package Tubecontains it. It is configured with Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74F series. In order for it to function properly, its output frequency should not exceed 80MHz. In total, it contains 1 elements. Despite external influences, it consumes 45mAof quiescent current. The 74F174 family contains it. In this case, the electronic component is mounted in the way of Through Hole. 16pins are included in its design. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 6. Due to its superior flexibility, it uses 7 circuits. For high efficiency, the supply voltage should be kept at 5V. There are 3 output lines in this JK flip flop. This input has 6lines in it. -1mA is set as the high level output current. Low level output current is set to 20mA. Operating temperatures should be lower than 70°C. It is recommended that the operating temperature be greater than 0°C. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage it supports. This frequency can be achieved 80MHz.
74F174PC Features
Tube package
74F series
16 pins
6 Bits
74F174PC Applications
There are a lot of ON Semiconductor 74F174PC Flip Flops applications.
- Synchronous counter
- Set-reset capability
- Balanced 24 mA output drivers
- Safety Clamp
- Buffered Clock
- Dynamic threshold performance
- Matched Rise and Fall
- ATE
- ESCC
- Memory
