74ACT574SJX Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74ACTseries of FPGAs. You should not exceed 110MHzin its output frequency. A total of 1 elements are present. Despite external influences, it consumes 40μAof quiescent current. Terminations are 20. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 4.5pF farads at the input. ACTis the family of this D flip flop. As soon as 5.5Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 4.5V for normal operation. There are 2 ports embedded in the flip flops. Furthermore, it has BROADSIDE VERSION OF 374as a characteristic.
74ACT574SJX Features
Tape & Reel (TR) package
74ACT series
74ACT574SJX Applications
There are a lot of Rochester Electronics, LLC 74ACT574SJX Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- Balanced Propagation Delays
- CMOS Process
- Reduced system switching noise
- Single Up Count-Control Line
- Common Clocks
- Frequency Dividers
- Buffered Clock
- Communications
