SN74LVCH16374ADL Overview
48-BSSOP (0.295, 7.50mm Width)is the packaging method. You can find it in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates at 1.65V~3.6Vvolts. Currently, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74LVCH series. Its output frequency should not exceed 150MHz. The list contains 2 elements. As a result, it consumes 20μA quiescent current and is not affected by external forces. The number of terminations is 48. It is a member of the 74LVCH16374 family. Power is provided by a 1.8V supply. A JK flip flop with a 5pFfarad input capacitance is used here. It belongs to the family of electronic devices known as LVC/LCX/Z. Surface Mount mounts this electronic component. This board is designed with 48pins on it. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 16bits. Normal operation requires a supply voltage (Vsup) above 1.65V. This D flip flop is equipped with 0 ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. To operate, the chip has a total of 3 output lines. It has 8lines.
SN74LVCH16374ADL Features
Tube package
74LVCH series
48 pins
16 Bits
SN74LVCH16374ADL Applications
There are a lot of Texas Instruments SN74LVCH16374ADL Flip Flops applications.
- Balanced Propagation Delays
- Memory
- Synchronous counter
- EMI reduction circuitry
- Load Control
- Set-reset capability
- Latch
- Computing
- Instrumentation
- Test & Measurement
