74ACT174SC Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74ACTseries of FPGAs. A frequency of 200MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. The 74ACT174 family contains this object. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. A total of 16pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. There are 6bits in this flip flop. The superior flexibility is achieved through the use of 7 circuits. For high efficiency, the supply voltage should be set to 5V. With a current output of 24mA , it offers maximum design flexibility. The JK flip flop is with 6 output lines to operate. This input has 3lines in it. High level output current is set to -24mA. It is set to 24mAfor low level output current. Temperatures below 85°Care ideal for operating. In order for the system to operate properly, the temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. In this case, it supports a maximum supply voltage of 5.5V. It is possible to obtain a frequency of 100MHz.
74ACT174SC Features
Tube package
74ACT series
16 pins
6 Bits
74ACT174SC Applications
There are a lot of ON Semiconductor 74ACT174SC Flip Flops applications.
- Set-reset capability
- Matched Rise and Fall
- Shift registers
- Clock pulse
- Modulo – n – counter
- Supports Live Insertion
- Power down protection
- Single Up Count-Control Line
- Differential Individual
- Synchronous counter
