SN74LVC1G66YEPR Overview
Shipping overseas is convenient with the electronic component packed in 5-XFBGA, DSBGA. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 5 terminations. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. A total of 5 pins are injected into the body of the electronic part. These analog multiplexers are built based on SPST - NO switching circuits. There are 1 circuits in this switch device. Try searching with 74LVC1G66 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. To find out what the 5 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. For this digital switch to work, 10μA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA.
SN74LVC1G66YEPR Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
SN74LVC1G66YEPR Applications
There are a lot of Texas Instruments SN74LVC1G66YEPR Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Multiplexers
- Industrial control systems
- Channel Banks
- Sample-and-hold systems
- Industrial and process control systems
- DSLAMs
- E1 Network Equipment
- ISDN NT1/TA
- Microprocessor controlled systems
