Name: TS12A4514DR
Brand: Texas Instruments
SKU: TS12A4514DR
Price: 0.29000 USD
Availability: InStock

new-10%

TS12A4514DR

Manufacturer part number:TS12A4514DR

Manufacturer:Texas Instruments

Description:75ns, 45ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS12A4514 8 Pins 1nA 3.3V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:TS12A4514DR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	15Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	TS12A4514
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	50nA
Power Dissipation	471mW
Max Supply Current	50nA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	520MHz
Turn-Off Delay Time	80 ns
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	94 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7.5pF 7.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-11.5pC
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.7V~12V
Normal Position	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS12A4514DR Product Details

TS12A4514DR Overview

Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. With a 3.3V voltage supply, the electrical component should be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SPST - NO switching circuits. Look for analog switch ic variants by searching with TS12A4514. Internally, this switch multiplexer has a resistance of 15Ohm. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. For this digital switch to work, 50nA current would suffice. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. If you put voltage higher than 50nA on the digital multiplexer, damage may occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There are 1 inputs to be operated. A 520MHz-bandwidth can be used for data transfer.