Name: ADG212AKNZ
Brand: Hotenda
SKU: ADG212AKNZ
Price: 6.46000 USD
Availability: InStock

new-10%

ADG212AKNZ

Manufacturer part number:ADG212AKNZ

Manufacturer:Hotenda

Description:600ns, 450ns SPST - NO 115Ohm Analog Switches ADG212 5nA 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:ADG212AKNZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Supplier Device Package	16-PDIP
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	115Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	470mW
Base Part Number	ADG212
Number of Outputs	4
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	25V
Power Dissipation	22.5mW
Max Supply Current	1mA
Number of Bits	4
Throw Configuration	SPST
Turn On Delay Time	600 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	15V ±15V
Supply Type	Dual
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	115Ohm
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	600ns, 450ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	5.75Ohm
Crosstalk	-80dB @ 100kHz
Drain to Source Resistance	115mOhm
Height	3.3mm
Length	20.07mm
Width	6.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG212AKNZ Product Details

ADG212AKNZ Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. A high-quality output is provided by the electrical component's 4 channels. A SPST - NO switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 4. Using the ADG212 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 115Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual supply. Putting voltage greater than 1mA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. The electrical part can be operated at 5V voltage levels. The 4 inputs need to be operated in order to work. An environment with a temperature greater than 85°C should not be used to operate the digital switches. A Drain to Source resistance of 115mOhm is shown for this electronic part. In this digital multiplexer, there are 4 outputs. There is a 16-PDIP package available from suppliers. It is capable of carrying out 4-bit operation.