SN74LVC1G3157DCKR Overview
Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is achieved by using advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 6. The electronic part delivers high-quality output through its 1 channels. A 2.3V voltage supply should turn on and run the electronic component. This electrical component is included in the 6 series of products. Circuits based on SPDT switching are used to construct these analog switch ics. There are 1 circuits in this switch device. Use 74LVC1G3157 to search for variants of the digital switches. As far as internal resistance is concerned, it has 15Ohm. Please refer to the datasheets for 6 pins functions. There is a standard Multiplexers or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 1.65V. It would be sufficient to run this analogue multiplexer with 1μA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA. In order to operate the 2 inputs, there are several steps to follow. There are various bandwidths available for data transfer. There is 11Ohm resistance between Drain and Source for this electronic part.
SN74LVC1G3157DCKR Features
SN74LVC1G3157DCKR Applications
There are a lot of Texas Instruments SN74LVC1G3157DCKR Analog Switches & Multiplexers ICs applications.
