ADG801BRTZ-REEL Overview
Packed in SOT-23-6, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around -40°C~125°C TA. In total, 6 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 6 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. ADG801 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 300mOhm. Datasheets for 6 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.8V as the lowest voltage for the electrical part. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 1μA. This switch operates within the bandwidth of 12MHz.
ADG801BRTZ-REEL Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 12MHz
ADG801BRTZ-REEL Applications
There are a lot of Analog Devices Inc. ADG801BRTZ-REEL Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Signal routing between systems
- HDTV
- Avionics and Military Systems
- Modems
- SONET/SDH ADM
- USB 1.1 signal switching circuits
- Digital Cross-Connects
- High reliability control systems
- Precision instrumentation
