SN74LS377DWG4 Overview
The item is packaged in SOICcases. There is a TTLoutput configured with it. In total, it contains 1 elements. A total of 20 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family LScan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE. -400μAis set as the high level output current. There is no low level output current set at 8mA. Temperatures below 70°Care ideal for operating. Temperatures above 0°Cshould be used. The minimum voltage required for operation is 4.75V. 5.25Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 40MHz. It uses the logic IC D FLIP-FLOP. There are 1 functions associated with the JK flip flop. 20pins are provided on the D latch. It features maximum design flexibility due to the 8mA output current.
SN74LS377DWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74LS377DWG4 Applications
There are a lot of Texas Instruments
SN74LS377DWG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
