SN74HCT574DWRG4 Overview
In the form of SOIC, it has been packaged. A total of 1elements are contained within it. The number of terminations is 20. An input voltage of 5Vpowers the D latch. In this case, the D flip flop belongs to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. In view of its reliability, this D flip flop is a good fit for TR. In order for the device to operate, it requires 5V power supplies. The flip flop has 2embedded ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Additionally, it is characterized by BROADSIDE VERSION OF 374. In this case, the high level output current is set to -6mA. 6mAis set as the low level output current. There should be a temperature below 85°Cduring operation. In order for the system to operate properly, the temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. There is a maximum voltage support of 5.5V. A frequency of 40MHzcan be achieved. BUS DRIVERis the logic IC it uses. There are 1 functions available on this T flip flop. A total of 20 pins are present on this device.
SN74HCT574DWRG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74HCT574DWRG4 Applications
There are a lot of Texas Instruments
SN74HCT574DWRG4 Flip Flops applications.
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
