SN74F109DRE4 Overview
The package is in the form of SOIC. As part of the package Tape & Reel (TR), it is embedded. In the configuration, TTLis used as the output. The element count is 2 . 16terminations have occurred. It is powered by a voltage of 5V . A device of this type belongs to the family of F/FAST. It is mounted in the way of Surface Mount. There are 16pins on it. The clock edge trigger type for this device is Positive Edge. An electronic part with 2bits has been designed. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 5Vis required to operate it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop. A high level output current of -1mAis set. In the low level output current setting, the current is set to 20mA. Ideally, the operating temperature should be below 70°C. If the operating temperature is higher than 0°C, the system should operate properly. In order for it to operate, a supply voltage of 4.5Vis required. A maximum voltage of 5.5V can be provided by it. This frequency can be achieved at 150MHz. There is a logic IC J-KBAR FLIP-FLOP used in the D flip flop. It has 2 functions. 16pins are available on this JK flip flop. With an output current of 20mA, this flip flop offers maximum design flexibility.
SN74F109DRE4 Features
Tape & Reel (TR) package
16 pins
2 Bits
5V power supplies
2 Functions
16 pin count
SN74F109DRE4 Applications
There are a lot of Texas Instruments
SN74F109DRE4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
