SN74F374DWG4 Overview
The item is packaged in SOICcases. There is a TTLoutput configured with it. In total, it contains 1 elements. A total of 20 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family F/FASTcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. -3mAis set as the high level output current. There is no low level output current set at 24mA. Temperatures below 70°Care ideal for operating. Temperatures above 0°Cshould be used. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 100MHz. It uses the logic IC BUS DRIVER. There are 1 functions associated with the JK flip flop. 20pins are provided on the D latch. It features maximum design flexibility due to the 24mA output current.
SN74F374DWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74F374DWG4 Applications
There are a lot of Texas Instruments
SN74F374DWG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
