SN74ALS273N Overview
The package is in the form of 20-DIP (0.300, 7.62mm). A package named Tubeincludes it. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. Through Holeis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74ALS series. Its output frequency should not exceed 35MHz Hz. The element count is 1 . There is a consumption of 20mAof quiescent energy. The 74ALS273family includes it. A part of the electronic system is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. The design is based on 8bits. The superior flexibility is achieved through the use of 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 3 input lines present. It is set to -2.6mAfor the high level output current. In the low level output current setting, 24mAis used. A temperature below 70°Cshould be used for operation. In order for the system to operate properly, the temperature should be higher than 0°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. It supports a maximum supply voltage of 5.5V volts. We are able to achieve a frequency of 35MHz.
SN74ALS273N Features
Tube package
74ALS series
20 pins
8 Bits
SN74ALS273N Applications
There are a lot of Texas Instruments SN74ALS273N Flip Flops applications.
- ESCC
- Count Modes
- Registers
- Data Synchronizers
- Safety Clamp
- Patented noise
- Computing
- ESD protection
- Individual Asynchronous Resets
- Computers
