MC100LVEL51MNR4G Overview
The flip flop is packaged in a case of 8-VFDFN Exposed Pad. There is an embedded version in the package Tape & Reel (TR). It is configured with Differentialas an output. There is a trigger configured with Positive, Negative. Surface Mountis occupied by this electronic component. Powered by a -3V~-3.8Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 100LVEL series. Its output frequency should not exceed 2.8GHz. During its operation, it consumes 35mA quiescent energy. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 100LVEL51 family. A voltage of 3.3V provides power to the D latch. It is mounted in the way of Surface Mount. 8pins are included in its design. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Normally, the supply voltage (Vsup) should be kept above 3V. In order to achieve its superior flexibility, 1 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on -3.3Vvolts of power. -50mA is set as the high level output current. 50mA is the low level output current.
MC100LVEL51MNR4G Features
Tape & Reel (TR) package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL51MNR4G Applications
There are a lot of ON Semiconductor MC100LVEL51MNR4G Flip Flops applications.
- Latch
- ESCC
- Load Control
- Matched Rise and Fall
- Guaranteed simultaneous switching noise level
- Consumer
- Individual Asynchronous Resets
- ATE
- Cold spare funcion
- Parallel data storage
