SN74AC74PWR Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. It is contained within the Cut Tape (CT)package. T flip flop uses Differentialas its output configuration. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACseries of FPGAs. You should not exceed 160MHzin the output frequency of the device. A total of 14 terminations have been made. The 74AC74family includes it. A voltage of 3V is used as the power supply for this D latch. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of AC. Surface Mount mounts this electronic component. The 14pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. 6Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. As a result of its reliable performance, this T flip flop is suitable for TR. The supply voltage should be maintained at 5V for high efficiency. With a current output of 24mA , it offers maximum design flexibility. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. There is a consumption of 2μAof quiescent current from it. Currently, there are 2 channels available.
SN74AC74PWR Features
Cut Tape (CT) package
74AC series
14 pins
SN74AC74PWR Applications
There are a lot of Texas Instruments SN74AC74PWR Flip Flops applications.
- Test & Measurement
- EMI reduction circuitry
- Dynamic threshold performance
- Power down protection
- Count Modes
- Balanced 24 mA output drivers
- Pattern generators
- Load Control
- Divide a clock signal by 2 or 4
- Frequency division
