OPA228PG4 Overview
It is packaged in an PDIP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 75μV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C ~ 85°C. A supply current of 3.7mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 160dB. This op amp ic has 1 circuits. One of its many advantages is that buffer op amp outputs -- signals. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. For optimal performance, this electrical part should be connected to a supply with a current of 3.7mA. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. Buffer op amp series numbers are indicated by the --.
OPA228PG4 Features
8 Pins
supply voltage of 15V
160dB voltage gain
Output Type: --
OPA228PG4 Applications
There are a lot of Texas Instruments
OPA228PG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
