NE556DBRG4 Overview
There is a SSOP that comes with the timer clock, which is enclosed in the packaging. Frequency 500kHz is set on the programmable timer.It is used to pack in Tape & Reel (TR) case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 20mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock has 121.789551mg in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 30mA. The number of Timers/Counters on the device is 2.
NE556DBRG4 Features
Operate frequency at 500kHz
Package / Case: Tape & Reel (TR)
Max Operating temperature at 0°C
Quiescent Current at 30mA
2 Timers/Counters
NE556DBRG4 Applications
There are a lot of Texas Instruments
NE556DBRG4 Programmable Timers & Oscillators applications.
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
