NE555PWG4 Overview
It is enclosed in the TSSOP packaging along with the digital timer. In this case, the frequency of the programmable timer is set to 500kHz.To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 39.008944mg in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 15mA. The number of Timers/Counters on the device is 1.
NE555PWG4 Features
Operate frequency at 500kHz
Max Operating temperature at 0°C
Quiescent Current at 15mA
1 Timers/Counters
NE555PWG4 Applications
There are a lot of Texas Instruments
NE555PWG4 Programmable Timers & Oscillators applications.
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
- Power-On Reset Timer
- Long Time One Shot
