LM555J/883 Overview
There is a CDIP enclosure with the programmable timer. It is used to pack in Rail/Tube case. To mount this digital timer with Through Hole. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 1. Its subcategory belongs to Analog Waveform Generation Functions. The minimum supply voltage of the chip must not be lower than 5V. The supply voltage of this chip should not exceed 15V. The timer clock runs quiescent current at 5mA. The number of Timers/Counters on the device is 1.
LM555J/883 Features
Package / Case: Rail/Tube
Max Operating temperature at -55°C
Quiescent Current at 5mA
1 Timers/Counters
LM555J/883 Applications
There are a lot of Texas Instruments
LM555J/883 Programmable Timers & Oscillators applications.
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
