HCT4066QPWRG4Q1 Overview
This electronic part is conveniently packaged in 14-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. 14 terminations have been made so far. A 4 channel electronic part produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 14 series. These analog multiplexers are built based on SPST - NO switching circuits. Using the 74HCT4066 search parameter, you can discover variants of the switch. A 80Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 14 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 4.5V. This digital switch can be operated with a current of 2μA. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 2μA, damage can occur. There are SEPARATE OUTPUT outputs on this analog switch ic. It is possible to transfer data over a 200MHz-bandwidth. It comes from the Automotive, AEC-Q100 series.
HCT4066QPWRG4Q1 Features
4 Channels
Switch Circuit: SPST - NO
2μA Supply Current
Bandwidth: 200MHz
HCT4066QPWRG4Q1 Applications
There are a lot of Texas Instruments HCT4066QPWRG4Q1 Analog Switches & Multiplexers ICs applications.
- DVD-R
- PCMCIA cards
- SONET/SDH ADM
- Frame Relay Equipment
- Sample hold systems
- Data switching
- Communications systems
- FTTH
- Battery Powered Instruments
- High speed data transmission line cards
