Name: MAX394EAP+T
Brand: Maxim Integrated
SKU: MAX394EAP+T
Price: 9.30000 USD
Availability: InStock

new

MAX394EAP+T

Manufacturer part number:MAX394EAP+T

Manufacturer:Maxim Integrated

Description:130ns, 75ns SPDT 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX394 20 Pins 200pA 5V 20-SSOP (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:MAX394EAP+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	65Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	MAX394
Output	SEPARATE OUTPUT
Pin Count	20
Operating Supply Voltage	8V
Power Supplies	3.3/5/+-5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	2.4V
Operating Supply Current	100nA
Nominal Supply Current	60nA
Max Supply Current	60nA
Turn On Delay Time	130 ns
Voltage - Supply, Single/Dual (±)	2.7V~15V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	2.4V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	66 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	130ns, 75ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.99mm
Length	7.2mm
Width	5.29mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX394EAP+T Product Details

MAX394EAP+T Overview

Shipping overseas is convenient due to the electrical component's packing in 20-SSOP (0.209, 5.30mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 20. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electrical component is included in the 20 series of products. A SPDT switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Try searching with MAX394 if you're looking for variants. As far as internal resistance is concerned, it has 65Ohm. For functions related to 20 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 16V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.4V. This multiplexer would work with 100nA current. When the digital multiplexer is charged above 60nA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 8V. For dual power supplies, a voltage of at least 2.4V should be attached. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating voltages range from 8V.