ADG802BRTZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 6 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Search with ADG802 if you are looking for analog multiplexer variants. It has an internal resistance of 300mOhm. The functions of 6 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 1.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1nA. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. The transfer of data can be performed over 12MHz bandwidths. The Drain to Source resistance of this electronic component is 700mOhm.
ADG802BRTZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
1nA Supply Current
Bandwidth: 12MHz
Drain-to-Source resistance: 700mOhm
ADG802BRTZ-REEL7 Applications
There are a lot of Analog Devices Inc.
ADG802BRTZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
