CD74HCT174ME4 Overview
SOICis the way it is packaged. In total, it contains 1 elements. There are 16 terminations,Power is supplied from a voltage of 5V volts. HCTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. To achieve this superior flexibility, 7 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TUBE. The system runs on a power supply of 5V watts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition, DUMMY VALis a characteristic of it. There is -4mA output current at the high level. There is 4mA output current at the low level. It is recommended that the operating temperature be lower than 125°C. A temperature above -55°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. 25MHzis the maximum frequency that can be achieved. This logic IC is D FLIP-FLOP. A total of 1 functions are provided by this T flip flop. With 16 pins, it is equipped with a low power consumption.
CD74HCT174ME4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT174ME4 Applications
There are a lot of Texas Instruments
CD74HCT174ME4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
