SN74F112DRE4 Overview
SOICis the packaging method. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of TTL. A total of 2elements are present in it. A total of 16terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as F/FAST. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Negative Edge. There is a FF/Latchbase part number assigned to the RS flip flops. It is designed with 2bits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 1output lines. A -1mAvalue is set for the high level output current. 20mA is the low level output current. A temperature below 70°Cis recommended for operation. It is recommended that the operating temperature be greater than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 130MHz. The logic IC it uses is J-K FLIP-FLOP. As a result, it is equipped with 2 functions . This device is equipped with a pin count of 16. In addition to its maximum design flexibility, the output current of the flip flop is 20mA.
SN74F112DRE4 Features
Tape & Reel (TR) package
16 pins
2 Bits
5V power supplies
2 Functions
16 pin count
SN74F112DRE4 Applications
There are a lot of Texas Instruments
SN74F112DRE4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
