Name: CD74HC4316M96G4
Brand: Texas Instruments
SKU: CD74HC4316M96G4
Availability: InStock

new-10%

CD74HC4316M96G4

Manufacturer part number:CD74HC4316M96G4

Manufacturer:Texas Instruments

Description:37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:CD74HC4316M96G4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	170Ohm
Additional Feature	ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Base Part Number	74HC4316
Pin Count	16
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	205 ns
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	205 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Signal Current-Max	0.025A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4316M96G4 Product Details

CD74HC4316M96G4 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 16 pins are injected into the electrical part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with 74HC4316 if you are looking for analog multiplexer variants. It has an internal resistance of 170Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Digital switch that provides Dual, Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. The switch multiplexer may be damaged if it is exposed to voltage greater than 16μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. With dual power supplies, you should attach at least 1V. This switch operates within the bandwidth of 200MHz. Check out the electrical component's additional features, such as the following: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.